Oil analysis can be conducted both off-line (in laboratory settings) and in-line (on equipment). Lab analysis is accurate, but because samples are tested infrequently and inconsistently, it is difficult to identify serious trends prior to expensive or catastrophic failures. Real-time on-machine oil condition monitoring is a better choice for optimizing equipment performance and life-cycle costs.
The benchmark in atmospheric distillation
Pour and cloud point testing of any petroleum products, down to -95°C (-139°F)
Determine evaporation loss of lubricating oils, an issue of particular importance in engine lubrication
Laboratory viscometer for accurate, reliable, repeatable viscosity readings
Temperature controlled viscometer for oil viscosity measurements in laboratories
Viscometer to measure elevated pressure and temperature
Automatically determine kinematic viscosity of lubricating oils, used oils, fuels, polymers
Determines direct kinematic viscosity of transparent and opaque liquids fully automated
Viscosity Analysis for PVT Oil, Core Analysis, and R&D
Determine flash point of petroleum products with the Pensky Martens method
Accurate Flash Point Determination for Low Volume Samples
Determine flash points with the Cleveland Open Cup method
Measure Wax Appearance Test (WAT) and Wax Disappearance Test (WDT) with the WAT-70Xi
The SeNSe2 is the latest development by AC Analytical Controls. The Sulphur Chemiluminescence Detector (SCD) provides the best sensitivity, best baseline stability and best equimolarity results, and as such it will flexibly fit with most chromatographic solutions.
AC Analytical Controls®, the global SIMDIS market leader, provides a full range of solutions that accurately determine true boiling point data from naphtha up to crude oil samples.
Solves the toughest analytical challenges through a GC that is designed, built, and tested for your specific application, to perform exactly as desired for the particular sample stream
The Crude Oil Analyzer combines the results of DHA Front End (FE) and High Temp (HT) SIMDIS analyses into one total true boiling point (TBP) report for the best performance in crude oil analysis.
The AC Analytical Controls® CNS SIMDIS for Crude Oil is the most advanced analyzer on the market to simultaneously determine the boiling range distribution of Carbon, Nitrogen, and Sulfur in crudes and final products.
AC Analytical Controls® offers the Extended Hydrocarbon Oil Index analyzer to determine the content of dispersed mineral oil between n-C7 and n-C40 in water by means of gas chromatography.
Hydrocarbon Group Type Analysis
©2024 PAC L.P. All rights reserved.